Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!
EASYFIT DIGITAL PLUG
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.
The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8515 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.
Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.
* Four car and six car powerbases available
We Also Recommend
PRO Hand Throttle With extra Resistor | 50180 | SCX PRO
Guide with Braids (3) Round Pin | A08877X400 | SCX